हेनान हुआवेई एल्यूमिनियम कंपनी, लिमिटेड. is a professional aluminum circle suppliers and manufacturer. We provide high quality aluminum circles with thicknesses between 0.3mm – 4mm and diameter ranging between 80mm – 1600mm, which would meet your needs for making cookware such as pots, पैन, fryers etc. cookware, बर्तन, Non-stick pan/pot, Bowl or cup, traffic sign and so on.
Production line processing
The main components of the aluminum circle unwinding and blanking production line are: लोडिंग ट्रॉली, खोलना, न्याय के लिए संघर्ष करनेवाला, फीडर, स्विंग इकाई, विशेष बंद एकल-बिंदु यांत्रिक प्रेस, त्वरित डाई परिवर्तन उपकरण, पैलेटाइज़िंग इकाई, scrap shear Cutting, हाइड्रोलिक प्रणाली, विद्युत नियंत्रण प्रणाली, वगैरह.
Technical characteristics of production line
Full-automatic numerical control, the production line should be started from the unwinding of the coil until the entire roll of material is completed. No manual contact with any work materials and no adjustments are required in the middle, which fundamentally eliminates the hidden production safety hazards of ordinary punch press production and Product quality hazards. The line can use the coil material to directly produce wafers without slitting and cross-cutting the coil material, जिससे उत्पादन प्रक्रिया कम हो जाती है, reduces the production cost, and reduces the possibility of damage to the surface of the coil material. The wafer is guaranteed to be free of oil stains and scratches.
This line makes full use of the width of the roll material, and uses a high-precision servo motor drive system to control the distance between the wafer and the distance between the wafer and the material edge to a minimum, fundamentally reducing the amount of waste, and making the raw material utilization rate reach 80% the above.
The production speed can reach 40-55 pieces per minute, which improves the production efficiency. Due to the use of modular mold design, the conversion time can be reduced to less than 15 minutes when converting the wafer production specifications. The diameter of the discs can be produced from 85 mm to 750 मिमी. Advanced uncoiling system, six-leveling machine, उच्च कठोरता यांत्रिक प्रेस, स्वचालित पैलेटाइज़िंग प्रणाली, वगैरह।, to ensure the high quality of wafer products.
विशेषता
- मंडलियों पर चयन की विस्तृत श्रृंखला’ आकार.
- प्रकाश परावर्तकों के लिए उत्कृष्ट सतह गुणवत्ता.
- Excellent hydrulic deep drawing and spinning quality.
- We provide heavy gauge circles with thicknesses up to 5mm diameter up to 1200mm, which would meet all your needs.
- Anodizing quality and hydrylic deep drawing quality which is suitable for cookware as well.
- Well-protected packing.
- Surface bright or mill finished ( customizable ), clean, flat, no wholes, no scratches, no oxidation, no oil stain, no dent, no inclusion, no scratches, no stain, no oxide dicoloration, no breaks, no corrosion, no roll marks, no dirt streaks and other defect which will interfere with use.
- गहरा आरेख, cutting edge- neat cutting edge with no burrs.
- Fastest producing in China
- 30KG/40KG package is OK, Fine finish, Accurate dimension, Robust construction, Rust resistance and Durable.
Punch processing
- Cutting blanks (चौकोर टुकड़ों में काटें)
- Blanking (punched into the aluminum circle you want)
If it is aluminum coil raw material, we need to add an uncoil in front.
Al Alloy
- 1xxx ( 1000 )Series: 1050, 1060, 1070, 1100( aa1100 ), 1200
- 3xxx ( 3000 )Series: 3003, 3004, 3020, 3105
- 5xxx ( 5000 )Series: 5052, 5083, 5730
- 6xxx ( 6000 )Series: 6061
- 7xxx ( 7000 ) Series: 7075
- 8xxx ( 8000 ) Series
Alu Temper
हे – H112: को, H24
T6
Sizes ( diameter/length )
Small Sizes: 10मिमी, 12मिमी, 18मिमी, 19मिमी, 20मिमी, 22मिमी, 25मिमी, 30मिमी(3cm), 32मिमी, 35मिमी(3.5cm), 36मिमी, 38मिमी ( 3.8 cm ), 40मिमी ( 4cm ), 44मिमी, 70मिमी, 75मिमी, 80मिमी(8cm), 85मिमी, 90मिमी, 100 मिमी, 115मिमी, 180मिमी, 230मिमी ( 1 inch, 1.25 inch, 1.5 inch, 3.5″, 4 inch )
Large Sizes: 200मिमी(20cm), 400मिमी, 600 मिमी, 1200मिमी, 2500मिमी ( 12″, 14 inch(14″), 26 inch, 72 inch )
मोटाई
1.0मिमी, 1.5मिमी, 2.0मिमी, 2.5मिमी, 3मिमी, 4मिमी, 1/4″ thick ( 3/16 inch )
Technique
DC grade, CC grade
सतह का उपचार
- Anodized: anodizing in the surface
- Sublimation: handysub dye sublimation, white sublimation, double sided sublimation
- Induction: with bonded full induction base disk
- Mirror: reflective mirror finish, bright finish
- Colored Coating: default silver
- Powder Coated
- Brushed
- Printed
आवेदन
Use for cookware products, high pressure cooker, high press cooking pot, बर्तन, industry furnace, dinner plate, whistling kettle, cafe tray, craft, LED bulbs, food dish, furniture
Service
We are a professional aluminum circle manufacturer and supplier Huawei aluminum provides you factory wholesale aluminium circle price, just tell us your requirement, we will provide you EXW, FOB, CFR, CIF, DDP., DDU aluminium circle price.
- Wholesale aluminium circle price
- Excellent aluminum circle quality
- Fast delivery
- Delivery Guaranteed
- Well-protected package
- Excellent after-sales service
- Free sample accepted
- Payment terms we can accept: T/T/ L/C, D/A, D/P, Western Union, MoneyGram etc
Advantage
Good quality pure aluminum or alloy
aluminium circle Surface Finish: Bright & smooth surface, without flow lines, slightly oiled to avoid White rusting. Smooth, Brightly , No Zone of Fracture, No Scratched, No oil Sludge
Quality of Material: Totally free from defects like White Rust, Oil Patches, Roll Marks, Edge Damage, Camber, Dents, Holes, Break Lines, Scratches and free from coil set.
We enjoy a good reputation among our customers for our aluminium circle cookware with high quality and competitive price, win high appreciation from our clients with the excellent workman-ship and professional ability. The quality matches with ISO 9001 quality management system.
पैकिंग
- ड्रायर्स को एल्युमीनियम सर्कल के किनारे रखें , उत्पादों को सूखा और साफ रखें.
- साफ प्लास्टिक कागज का प्रयोग करें , एल्यूमीनियम सर्कल को पैक करना , अच्छी सीलिंग रखें.
- साँप की खाल वाले कागज का प्रयोग करें , प्लास्टिक कागज की सतह को पैक करना , अच्छी सीलिंग रखें.
- अगला, पैकेजिंग के दो तरीके हैं:
- एक तरीका लकड़ी के फूस की पैकेजिंग है , सतह को पैक करने वाले क्रस्टी पेपर का उपयोग करना;
- दूसरा तरीका लकड़ी की केस पैकेजिंग है , सतह को पैक करने के लिए लकड़ी के केस का उपयोग करना.
- अंतिम, स्टील बेल्ट को लकड़ी के बक्से की सतह पर रखें , लकड़ी के बक्से को मजबूती और सुरक्षित रखें.
Countries that have been exported
Africa: Morocco, Ethiopia, Egypt etc …
Vietnam, Ukraine, Tailand, Turkey, India, Malaysia, Italy etc …