河南華為アルミニウム有限公司, 株式会社. is a professional aluminum circle suppliers and manufacturer. We provide high quality aluminum circles with thicknesses between 0.3mm – 4mm and diameter ranging between 80mm – 1600mm, which would meet your needs for making cookware such as pots, 鍋, fryers etc. cookware, 食器, Non-stick pan/pot, Bowl or cup, traffic sign and so on.
Production line processing
The main components of the aluminum circle unwinding and blanking production line are: ローディングトロリー, アンコイラー, レベラー, フィーダ, スイングユニット, 特殊密閉一点メカニカルプレス, 急速金型交換装置, パレタイジングユニット, scrap shear Cutting, 油圧システム, 電気制御システム, 等.
Technical characteristics of production line
Full-automatic numerical control, the production line should be started from the unwinding of the coil until the entire roll of material is completed. No manual contact with any work materials and no adjustments are required in the middle, which fundamentally eliminates the hidden production safety hazards of ordinary punch press production and Product quality hazards. The line can use the coil material to directly produce wafers without slitting and cross-cutting the coil material, 生産工程を削減します, reduces the production cost, and reduces the possibility of damage to the surface of the coil material. The wafer is guaranteed to be free of oil stains and scratches.
This line makes full use of the width of the roll material, and uses a high-precision servo motor drive system to control the distance between the wafer and the distance between the wafer and the material edge to a minimum, fundamentally reducing the amount of waste, and making the raw material utilization rate reach 80% the above.
The production speed can reach 40-55 pieces per minute, which improves the production efficiency. Due to the use of modular mold design, the conversion time can be reduced to less than 15 minutes when converting the wafer production specifications. The diameter of the discs can be produced from 85 mm to 750 mm. Advanced uncoiling system, six-leveling machine, 高剛性メカニカルプレス, 自動パレタイジングシステム, 等, to ensure the high quality of wafer products.
特徴
- サークルの幅広い選択’ サイズ.
- 照明用反射板として優れた表面品質.
- Excellent hydrulic deep drawing and spinning quality.
- We provide heavy gauge circles with thicknesses up to 5mm diameter up to 1200mm, which would meet all your needs.
- Anodizing quality and hydrylic deep drawing quality which is suitable for cookware as well.
- Well-protected packing.
- Surface bright or mill finished ( customizable ), clean, flat, no wholes, no scratches, no oxidation, no oil stain, no dent, no inclusion, no scratches, no stain, no oxide dicoloration, no breaks, no corrosion, no roll marks, no dirt streaks and other defect which will interfere with use.
- 深絞り加工, cutting edge- neat cutting edge with no burrs.
- Fastest producing in China
- 30KG/40KG package is OK, Fine finish, Accurate dimension, Robust construction, Rust resistance and Durable.
Punch processing
- Cutting blanks (正方形に切る)
- Blanking (punched into the aluminum circle you want)
If it is aluminum coil raw material, we need to add an uncoil in front.
Al Alloy
- 1xxx ( 1000 )Series: 1050, 1060, 1070, 1100( aa1100 ), 1200
- 3xxx ( 3000 )Series: 3003, 3004, 3020, 3105
- 5xxx ( 5000 )Series: 5052, 5083, 5730
- 6xxx ( 6000 )Series: 6061
- 7xxx ( 7000 ) Series: 7075
- 8xxx ( 8000 ) Series
Alu Temper
○ – H112: に, H24
T6
Sizes ( diameter/length )
Small Sizes: 10mm, 12mm, 18mm, 19mm, 20mm, 22mm, 25mm, 30mm(3cm), 32mm, 35mm(3.5cm), 36mm, 38mm ( 3.8 cm ), 40mm ( 4cm ), 44mm, 70mm, 75mm, 80mm(8cm), 85mm, 90mm, 100 mm, 115mm, 180mm, 230mm ( 1 inch, 1.25 inch, 1.5 inch, 3.5″, 4 inch )
Large Sizes: 200mm(20cm), 400mm, 600 mm, 1200mm, 2500mm ( 12″, 14 inch(14″), 26 inch, 72 inch )
厚さ
1.0mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm, 1/4″ thick ( 3/16 inch )
Technique
DC grade, CC grade
表面処理
- Anodized: anodizing in the surface
- Sublimation: handysub dye sublimation, white sublimation, double sided sublimation
- Induction: with bonded full induction base disk
- Mirror: reflective mirror finish, bright finish
- Colored Coating: default silver
- Powder Coated
- Brushed
- Printed
応用
Use for cookware products, high pressure cooker, high press cooking pot, 食器, industry furnace, dinner plate, whistling kettle, cafe tray, craft, LED bulbs, food dish, furniture
Service
We are a professional aluminum circle manufacturer and supplier Huawei aluminum provides you factory wholesale aluminium circle price, just tell us your requirement, we will provide you EXW, FOB, CFR, CIF, DDP., DDU aluminium circle price.
- Wholesale aluminium circle price
- Excellent aluminum circle quality
- Fast delivery
- Delivery Guaranteed
- Well-protected package
- Excellent after-sales service
- Free sample accepted
- Payment terms we can accept: T/T/ L/C, D/A, D/P, Western Union, MoneyGram etc
Advantage
Good quality pure aluminum or alloy
aluminium circle Surface Finish: Bright & smooth surface, without flow lines, slightly oiled to avoid White rusting. Smooth, Brightly , No Zone of Fracture, No Scratched, No oil Sludge
Quality of Material: Totally free from defects like White Rust, Oil Patches, Roll Marks, Edge Damage, Camber, Dents, Holes, Break Lines, Scratches and free from coil set.
We enjoy a good reputation among our customers for our aluminium circle cookware with high quality and competitive price, win high appreciation from our clients with the excellent workman-ship and professional ability. The quality matches with ISO 9001 quality management system.
パッキング
- 乾燥機をアルミサークルの側に置きます , 製品を乾燥した清潔な状態に保ちます.
- きれいなプラスチックペーパーを使用してください , アルミサークルを梱包する , 良好な密閉性を保つ.
- ヘビ紙を使用 , プラスチック紙の表面を詰める , 良好な密閉性を保つ.
- 次, 梱包方法は2通りあります:
- 1つの方法は木製パレット梱包です , 表面を詰めるカサカサした紙を使用する;
- もう一つの方法は木箱梱包です , 表面を詰めた木製ケースを使用.
- ファイナル, スチールベルトを木箱の表面に置きます , 木箱の堅牢性と安全性を保ちます.
Countries that have been exported
Africa: Morocco, Ethiopia, Egypt etc …
Vietnam, Ukraine, Tailand, Turkey, India, Malaysia, Italy etc …