Over ons

Henan Huawei Aluminium Co., Ltd. is a professional aluminum circle suppliers and manufacturer. We provide high quality aluminum circles with thicknesses between 0.3mm – 4mm and diameter ranging between 80mm – 1600mm, which would meet your needs for making cookware such as pots, pannen, fryers etc. cookware, keukengerei, Non-stick pan/pot, Bowl or cup, traffic sign and so on.

Production line processing

The main components of the aluminum circle unwinding and blanking production line are: laadwagen, afwikkelaar, gelijkmaker, voeder, schommel eenheid, speciale gesloten éénpunts mechanische pers, snel matrijswisselapparaat, palletiseereenheid, scrap shear Cutting, hydraulisch systeem, elektrisch besturingssysteem, enz.

Technical characteristics of production line

Full-automatic numerical control, the production line should be started from the unwinding of the coil until the entire roll of material is completed. No manual contact with any work materials and no adjustments are required in the middle, which fundamentally eliminates the hidden production safety hazards of ordinary punch press production and Product quality hazards. The line can use the coil material to directly produce wafers without slitting and cross-cutting the coil material, which reduces the production process, reduces the production cost, and reduces the possibility of damage to the surface of the coil material. The wafer is guaranteed to be free of oil stains and scratches.

This line makes full use of the width of the roll material, and uses a high-precision servo motor drive system to control the distance between the wafer and the distance between the wafer and the material edge to a minimum, fundamentally reducing the amount of waste, and making the raw material utilization rate reach 80% the above.

The production speed can reach 40-55 pieces per minute, which improves the production efficiency. Due to the use of modular mold design, the conversion time can be reduced to less than 15 minutes when converting the wafer production specifications. The diameter of the discs can be produced from 85 mm to 750 mm. Advanced uncoiling system, six-leveling machine, high rigidity mechanical press, automatic palletizing system, enz., to ensure the high quality of wafer products.

Functie

  • Ruime keuze op cirkels’ maat.
  • Uitstekende oppervlaktekwaliteit voor verlichtingsreflectoren.
  • Excellent hydrulic deep drawing and spinning quality.
  • We provide heavy gauge circles with thicknesses up to 5mm diameter up to 1200mm, which would meet all your needs.
  • Anodizing quality and hydrylic deep drawing quality which is suitable for cookware as well.
  • Well-protected packing.
  • Surface bright or mill finished ( customizable ), clean, flat, no wholes, no scratches, no oxidation, no oil stain, no dent, no inclusion, no scratches, no stain, no oxide dicoloration, no breaks, no corrosion, no roll marks, no dirt streaks and other defect which will interfere with use.
  • diepe tekening, cutting edge- neat cutting edge with no burrs.
  • Fastest producing in China
  • 30KG/40KG package is OK, Fine finish, Accurate dimension, Robust construction, Rust resistance and Durable.

Punch processing

  1. Cutting blanks (cut into squares)
  2. Blanking (punched into the aluminum circle you want)

If it is aluminum coil raw material, we need to add an uncoil in front.

Al Alloy

  • 1xxx ( 1000 )Series: 1050, 1060, 1070, 1100( aa1100 ), 1200
  • 3xxx ( 3000 )Series: 3003, 3004, 3020, 3105
  • 5xxx ( 5000 )Series: 5052, 5083, 5730
  • 6xxx ( 6000 )Series: 6061
  • 7xxx ( 7000 ) Series: 7075
  • 8xxx ( 8000 ) Series

Alu Temper

O – H112: NAAR, H24

T6

Sizes ( diameter/length )

Small Sizes: 10mm, 12mm, 18mm, 19mm, 20mm, 22mm, 25mm, 30mm(3cm), 32mm, 35mm(3.5cm), 36mm, 38mm ( 3.8 cm ), 40mm ( 4cm ), 44mm, 70mm, 75mm, 80mm(8cm), 85mm, 90mm, 100 mm, 115mm, 180mm, 230mm ( 1 inch, 1.25 inch, 1.5 inch, 3.5″, 4 inch )

Large Sizes: 200mm(20cm), 400mm, 600 mm, 1200mm, 2500mm ( 12″, 14 inch(14″), 26 inch, 72 inch )

Dikte

1.0mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm, 1/4″ thick ( 3/16 inch )

Technique

DC grade, CC grade

Oppervlaktebehandeling

  • Anodized: anodizing in the surface
  • Sublimation: handysub dye sublimation, white sublimation, double sided sublimation
  • Induction: with bonded full induction base disk
  • Mirror: reflective mirror finish, bright finish
  • Colored Coating: default silver
  • Powder Coated
  • Brushed
  • Printed

Sollicitatie

Use for cookware products, high pressure cooker, high press cooking pot, keukengerei, industry furnace, dinner plate, whistling kettle, cafe tray, craft, LED bulbs, food dish, furniture

Service

We are a professional aluminum circle manufacturer and supplier Huawei aluminum provides you factory wholesale aluminium circle price, just tell us your requirement, we will provide you EXW, FOB, CFR, CIF, DDP., DDU aluminium circle price.

  • Wholesale aluminium circle price
  • Excellent aluminum circle quality
  • Fast delivery
  • Delivery Guaranteed
  • Well-protected package
  • Excellent after-sales service
  • Free sample accepted
  • Payment terms we can accept: T/T/ L/C, D/A, D/P, Western Union, MoneyGram etc

Advantage

Good quality pure aluminum or alloy

aluminium circle Surface Finish: Bright & smooth surface, without flow lines, slightly oiled to avoid White rusting. Smooth, Brightly , No Zone of Fracture, No Scratched, No oil Sludge

Quality of Material: Totally free from defects like White Rust, Oil Patches, Roll Marks, Edge Damage, Camber, Dents, Holes, Break Lines, Scratches and free from coil set.

We enjoy a good reputation among our customers for our aluminium circle cookware with high quality and competitive price, win high appreciation from our clients with the excellent workman-ship and professional ability. The quality matches with ISO 9001 quality management system.

Verpakking

  • Plaats de drogers naast de aluminium cirkel , houd de producten droog en schoon.
  • Gebruik het schone plastic papier , verpakking van de aluminium cirkel , goede afdichting behouden.
  • Gebruik het slangenleerpapier , verpakking van het oppervlak van het plastic papier , goede afdichting behouden.
  • Volgende, er zijn twee manieren van verpakken:
    • Eén manier is het verpakken van houten pallets , gebruik het knapperige papier dat het oppervlak bedekt;
    • Een andere manier is het verpakken van houten kistjes , met behulp van de houten kist die het oppervlak inpakt.
  • Finale, leg de stalen riem op het oppervlak van de houten kist , houd de houten kist stevig en veilig.

Countries that have been exported

Africa: Morocco, Ethiopia, Egypt etc

Vietnam, Ukraine, Tailand, Turkey, India, Malaysia, Italy etc

    Send your message to us

    ( optional)