Kuhusu sisi

Henan Huawei Aluminium Co., Ltd. is a professional aluminum circle suppliers and manufacturer. We provide high quality aluminum circles with thicknesses between 0.3mm – 4mm and diameter ranging between 80mm – 1600mm, which would meet your needs for making cookware such as pots, sufuria, fryers etc. cookware, vyombo, Non-stick pan/pot, Bowl or cup, traffic sign and so on.

Production line processing

The main components of the aluminum circle unwinding and blanking production line are: upakiaji kitoroli, kifungua bomba, leveler, mlishaji, kitengo cha swing, vyombo vya habari maalum vilivyofungwa vya mitambo ya sehemu moja, kifaa cha kubadilisha haraka kufa, kitengo cha palletizing, scrap shear Cutting, mfumo wa majimaji, mfumo wa kudhibiti umeme, nk.

Technical characteristics of production line

Full-automatic numerical control, the production line should be started from the unwinding of the coil until the entire roll of material is completed. No manual contact with any work materials and no adjustments are required in the middle, which fundamentally eliminates the hidden production safety hazards of ordinary punch press production and Product quality hazards. The line can use the coil material to directly produce wafers without slitting and cross-cutting the coil material, which reduces the production process, reduces the production cost, and reduces the possibility of damage to the surface of the coil material. The wafer is guaranteed to be free of oil stains and scratches.

This line makes full use of the width of the roll material, and uses a high-precision servo motor drive system to control the distance between the wafer and the distance between the wafer and the material edge to a minimum, fundamentally reducing the amount of waste, and making the raw material utilization rate reach 80% the above.

The production speed can reach 40-55 pieces per minute, which improves the production efficiency. Due to the use of modular mold design, the conversion time can be reduced to less than 15 minutes when converting the wafer production specifications. The diameter of the discs can be produced from 85 mm to 750 mm. Advanced uncoiling system, six-leveling machine, high rigidity mechanical press, automatic palletizing system, nk., to ensure the high quality of wafer products.

Kipengele

  • Aina mbalimbali za uteuzi kwenye miduara’ ukubwa.
  • Ubora Bora wa Uso wa Viakisi taa.
  • Excellent hydrulic deep drawing and spinning quality.
  • We provide heavy gauge circles with thicknesses up to 5mm diameter up to 1200mm, which would meet all your needs.
  • Anodizing quality and hydrylic deep drawing quality which is suitable for cookware as well.
  • Well-protected packing.
  • Surface bright or mill finished ( customizable ), clean, flat, no wholes, no scratches, no oxidation, no oil stain, no dent, no inclusion, no scratches, no stain, no oxide dicoloration, no breaks, no corrosion, no roll marks, no dirt streaks and other defect which will interfere with use.
  • kuchora kwa kina, cutting edge- neat cutting edge with no burrs.
  • Fastest producing in China
  • 30KG/40KG package is OK, Fine finish, Accurate dimension, Robust construction, Rust resistance and Durable.

Punch processing

  1. Cutting blanks (cut into squares)
  2. Blanking (punched into the aluminum circle you want)

If it is aluminum coil raw material, we need to add an uncoil in front.

Al Alloy

  • 1xxx ( 1000 )Series: 1050, 1060, 1070, 1100( aa1100 ), 1200
  • 3xxx ( 3000 )Series: 3003, 3004, 3020, 3105
  • 5xxx ( 5000 )Series: 5052, 5083, 5730
  • 6xxx ( 6000 )Series: 6061
  • 7xxx ( 7000 ) Series: 7075
  • 8xxx ( 8000 ) Series

Alu Temper

O – H112: KWA, H24

T6

Sizes ( diameter/length )

Small Sizes: 10mm, 12mm, 18mm, 19mm, 20mm, 22mm, 25mm, 30mm(3cm), 32mm, 35mm(3.5cm), 36mm, 38mm ( 3.8 cm ), 40mm ( 4cm ), 44mm, 70mm, 75mm, 80mm(8cm), 85mm, 90mm, 100 mm, 115mm, 180mm, 230mm ( 1 inch, 1.25 inch, 1.5 inch, 3.5″, 4 inch )

Large Sizes: 200mm(20cm), 400mm, 600 mm, 1200mm, 2500mm ( 12″, 14 inch(14″), 26 inch, 72 inch )

Unene

1.0mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm, 1/4″ thick ( 3/16 inch )

Technique

DC grade, CC grade

Matibabu ya uso

  • Anodized: anodizing in the surface
  • Sublimation: handysub dye sublimation, white sublimation, double sided sublimation
  • Induction: with bonded full induction base disk
  • Mirror: reflective mirror finish, bright finish
  • Colored Coating: default silver
  • Powder Coated
  • Brushed
  • Printed

Maombi

Use for cookware products, high pressure cooker, high press cooking pot, vyombo, industry furnace, dinner plate, whistling kettle, cafe tray, craft, LED bulbs, food dish, furniture

Service

We are a professional aluminum circle manufacturer and supplier Huawei aluminum provides you factory wholesale aluminium circle price, just tell us your requirement, we will provide you EXW, FOB, CFR, CIF, DDP., DDU aluminium circle price.

  • Wholesale aluminium circle price
  • Excellent aluminum circle quality
  • Fast delivery
  • Delivery Guaranteed
  • Well-protected package
  • Excellent after-sales service
  • Free sample accepted
  • Payment terms we can accept: T/T/ L/C, D/A, D/P, Western Union, MoneyGram etc

Advantage

Good quality pure aluminum or alloy

aluminium circle Surface Finish: Bright & smooth surface, without flow lines, slightly oiled to avoid White rusting. Smooth, Brightly , No Zone of Fracture, No Scratched, No oil Sludge

Quality of Material: Totally free from defects like White Rust, Oil Patches, Roll Marks, Edge Damage, Camber, Dents, Holes, Break Lines, Scratches and free from coil set.

We enjoy a good reputation among our customers for our aluminium circle cookware with high quality and competitive price, win high appreciation from our clients with the excellent workman-ship and professional ability. The quality matches with ISO 9001 quality management system.

Ufungashaji

  • Weka vikaushio kwenye mduara wa alumini , kuweka bidhaa kavu na safi.
  • Tumia karatasi safi ya plastiki , kufunga mduara wa alumini , weka muhuri mzuri.
  • Tumia karatasi ya ngozi ya nyoka , kufunga uso wa karatasi ya plastiki , weka muhuri mzuri.
  • Inayofuata, kuna njia mbili za ufungaji:
    • Njia moja ni ufungaji wa pallet ya mbao , kwa kutumia karatasi ganda iliyopakia uso;
    • Njia nyingine ni ufungaji wa kesi ya mbao , kwa kutumia kesi ya mbao kufunga uso.
  • Mwisho, weka mkanda wa chuma kwenye uso wa sanduku la mbao , weka kasi ya sanduku la mbao na salama.

Countries that have been exported

Africa: Morocco, Ethiopia, Egypt etc

Vietnam, Ukraine, Tailand, Turkey, India, Malaysia, Italy etc

    Send your message to us

    ( optional)